Triple O Air Pumps
Original and compatible replacement air pumps for your Triple O ozone system. 120v and 230v options with higher output available.
The Component That Drives Your Entire Triple O System
The air pump is what pushes ambient air into your Triple O ozone generator, where it gets converted into ozone gas. Without adequate air pressure, the UV lamp or corona discharge unit cannot produce enough ozone to treat your water tank effectively. Air pumps run continuously, which means they are under constant mechanical stress. Over time, output drops, diaphragms weaken, and the pump delivers less pressure than the system needs. The result is lower ozone output, reduced oxidation, and gradually declining water quality.
If you notice fewer bubbles rising through your tank, a return of iron staining, or odor coming back, the air pump is the first component to check.
Original Triple O Air Pumps: TOA101 and TOA102
The TOA101 (120v) and TOA102 (230v) are the original Triple O air pump replacements. Both produce 6 PSI of compressed air output, which matches the factory specification for standard Triple O ozone systems. These are direct drop-in replacements that connect to the existing hose and fittings without modification, and they draw minimal power during continuous operation.
Compatible Triple O Air Pumps: AP120 and AP220
The AP120 (120v) and AP220 (230v) are heavy duty compatible alternatives that deliver higher pressure at 8 PSI, a meaningful upgrade over the original 6 PSI pumps. They are built with stainless steel internals and an open-frame design that allows for better airflow and lower operating temperature, which extends the equipment’s service life. Both are direct replacements for the TOA101 and TOA102 and connect to the same fittings with no tools required.
The higher pressure translates to more ozone production and better diffusion at the tank, which is particularly beneficial for larger water tanks or homes with higher water demand. Because the ozone treatment process uses no chemicals, maintaining strong air pump output is the only way to keep the system treating water effectively. Both the original and compatible pumps cover a wide range of residential ozone system configurations.
Why Homeowners Choose Compatible Triple O Air Pumps
Original (TOA101, TOA102) and compatible (AP120, AP220) options available in both 120v and 230v
Compatible pumps deliver 8 PSI versus the original 6 PSI for stronger ozone output
Stainless steel construction and open-frame design for longer service life
Direct drop-in replacement with no modification to existing fittings or tubing
Priced below dealer rates with a lowest price guarantee
Ships fast with tracking on every order
When to Replace Your Triple O Air Pump
Regular air pump maintenance keeps your Triple O system running at full capacity. Pumps typically last 1 to 2 years under continuous operation. Replace the pump when you notice a drop in bubble output at the tank, a decline in water quality, or audible changes in how the pump sounds during operation. When you swap the pump, also inspect the check valve, pressure regulator, and other accessories in the ozone line for wear. If rust is found on the springs inside the pump, this indicates an internal ozone leak that needs addressing before installing a new unit. Run the TOLD leak detection test to confirm the system is sealed before swapping in a replacement. For more information on diagnosing common issues before committing to repairs, contact our customer service team for technical support.
Never Miss a Part Replacement
A weakening air pump reduces ozone output gradually, and the decline is easy to miss until water quality has already suffered. AutoShip delivers your replacement pump on a fixed schedule so the new unit is at your door before the old one gives out. If you need help choosing between the original and compatible options, our customer service team can provide technical support to match the right pump to your system.